- Light treatment
- Wave resistance apparatus
- Liquid cell battery
For nervous conditions Casey often recommended methods involving the introduction of restorative forces into the body by vibration rather than by any other means. For this purpose he invented (while in a trance state) two devices, a battery of fluid cells and an apparatus of wave resistance, and gave precise directions as to how to make them:
These aids assist in creating that vibration which is necessary not only for the coordination of the gland system, but for the creation of the regenerative capacity of the nerves themselves… They affect directly the gland system – the thyroid gland, the adrenal glands and the thymus gland, all the glands of the body, thus inducing them to respond with a manifestation of assimilating forces.
For the processes of the glands, their activity, must be reduced to the secretion of that which contributes to the reproduction of the organism of itself at the physical level. (1475-1)
Casey advised periodic exposure of the body to a weak electric current for an hour, and the strength of the current was the same as that used at the University of Missouri in the above-mentioned studies. His interpretation of the “subtle imperceptible changes” referred to by Wheeler is given in the following reading made to a sixty-seven-year-old woman suffering from senility and emaciation. She was advised to use a battery of liquid cells:
When electric vibrations are transmitted, know and be assured that Life itself is the Creating Power of God, and it manifests in man as electricity or vibrations. Know that the force of nature which is called electric or electricity is the same force which we worship as Creator or God in action!
Seeing it, feeling it, knowing it, you will realize that not only the body is revitalized, but every atom of it manifests itself as a knowledge of the activity of this Creating Power, or Principle, which encompasses spirit, mind and body – all these three components are renewed. For this is the trinity embodied in man. This is the trinity embodied in the principles of the life force itself: Father, Son and Spirit – this is the unity of Body, Mind and Soul. One Spirit, One God, One activity. So behold Him, recognize Him in these manifestations. (1299-1) Note that Nikola Teslo also pointed out that electricity is a visible manifestation of God.
For example, it is known that most biological processes are based on chemical reactions. The chemical properties involved in these reactions are determined by the arrangement and movement of electrons and atomic nuclei. These, in turn, are determined by the interaction of the electric and magnetic fields of elementary particles. Consequently, the principles of chemistry are consequences of such sciences as electrodynamics and quantum physics. In living organisms, these effects are markedly enhanced by the semiconducting properties attributed to biological structures. It is these effects that now strongly influence the course of clinical and basic research.
“…A severe form of arthritis, Casey’s magic could not quell the Irish fervor of this young journalist. The treatment Casey recommended was lengthy and difficult. In addition to daily manipulation, exercise, and water treatments, it included the use of a battery that sends low-voltage electrical impulses to the body.”
1. Ultraviolet with green light projection
This technique was pioneered by Raleigh. It should be done twice a week for twenty minutes. The prerequisite is that the light be placed at least a few feet from the body, but the green light should be about eighteen or twenty inches from the body and that by moving it the whole area should be covered from the throat and lungs to the end of the spine, that is, that for twenty minutes it should cover the whole area of the back, do you understand? For this particular person, do not use ultraviolet WITHOUT using green glass between the rays and the body.
Casey’s arsenal consisted of the following treatments: 1) Osteopathy (spinal correction) 2) Diet 3) Massage 4) Exercise 5) Phytotherapy 6) Various chemical compounds 7) Use of Radial Appliance, Wett Cell Batery. The last two apparatuses Casey invented in a trance state.
With the help of spine correction, diet and regular physical exercises (yoga) I managed to significantly improve my health and stop the development of a chronic disease of the digestive system. Having ascertained the effectiveness of his recommendations, I decided to include the use of devices in my preventive measures.
Google brought up links of several American manufacturers. The average price of Radial Appliance (further on in the text “Radiac”) with delivery was about 350$, and Wett Cell Batery (further on in the text “WetSel”) and even more! So, the sensible solution is to make one of the appliances with your own hands.
Casey, in his readings, talked about the body itself generating a constant weak electric current or electrical vibrations. In addition, these vibrations are partly of the nature of radio waves, and propagate around the body. That organ or part of the body which is diseased is deficient in such electrical vibrations.
VetSel produced an electric current of very low frequency that could not be felt but could be measured with a meter. It was passed through solutions of gold chloride, silver nitrate, atomidine or camphor, depending on the needs of the individual and Casey’s prescription. This battery was attached to the body by means of plates, and the placement of these plates could be varied, depending on the needs and complaints of the individual. In some cases, Casey gave specific instructions regarding the placement of these plates, and in others he did not. The main function of the VetSel is to energize the body with its inherent electrical energy.
2. Wave Resistance (Radial Appliance).
Wave resistance was a device with two steel poles in a steel box covered with glass and charcoal, which was placed in ice for thirty minutes and then tied to the wrist and opposite ankle. This stimulated blood circulation and relaxed the person. In fact, the person who used this device would immediately fall into sleep. This was especially recommended for insomnia and nervous tension.
Wave Resistance was mainly recommended as a relaxation device in cases of nervous tension, poor coordination, insomnia, neurasthenia, exhaustion and so on.
The device itself does not generate any electricity. Casey said that Radiac acts like a magnet, redistributing electrical potentials in the body. Simply put, the device transfers electrical vibrations from an area of excess (e.g., an overexcited Central Nervous System) to an area of deficiency (e.g., the lung area in acute respiratory infections).
Radial Appliance immersed in a container of ice.
The Radial Appliance consists of a single monolithic vessel with protruding contact terminals. At the core of the apparatus are two bars of high carbon steel (tool steel) separated by two strips of glass. This construction is tightly surrounded by bars of pure graphite and wrapped with paper tape for good contact. All of this is the core of the apparatus. The core is separated from the container by a layer of carbon powder. The container is hermetically sealed to prevent water from getting inside. The contacts, which can be seen from above, are screwed to bars of steel. On the other side, the wires end in copper-nickel alloy contact cups.
Pluses of the device – all components are easily available, low price of components, no dangerous chemical compounds that need to be disposed of over time, relative shock resistance, very easy to use.
Casey himself defined VetSel for the treatment of diseases, and Radiac for their prevention.
The container for the Radiator should be made of any non-iron material, fairly strong and resistant to water. The ideal option in our case (limited budget) would be a can of Gala cleaning powder, or any other of similar size. Size is important here. It is also possible to make a square container from copper, as in the classic version, but it is very difficult and materially expensive.
A layer of charcoal powder is placed between the core and the container. Casey himself says that the charcoal should preferably be made of willow. It is possible to make charcoal from willow in principle, but it is also particularly labor intensive. I bought charcoal for kebab in the supermarket (not briquettes!) from leafy wood. 3 kilograms costs about 4-5$ (for everyone’s convenience I will measure prices in dollars). Next, we put the charcoal through a meat grinder, and after that through an old manual coffee grinder. We get charcoal powder for the machine. The layer of charcoal between the core and the container should be about 1 inch (2.54 cm) on all sides.
Next in complexity are the contact plates that will be attached to the wrists and ankles. Casey said that the contacts should be smooth and round so as not to scratch the skin or constrict the blood vessels. He also recommended that they be made with a slight bulge in the center, in the shape of a plate. The material from which contacts for Radiac are made is nisilber (an alloy of copper and nickel). This alloy is used to make jubilee coins. They’ll be perfect for us. In the bank I bought 2 jubilee coins, cost me 4$. Then I sanded one side of the coin with sandpaper (grit 100-150-300). In the center made a depression to a depth of 1.5 mm. diameter of 7 mm, and in it drilled two small holes with a diameter of 1.5 mm. each. It turned out very similar to a button )) Through these two holes I threaded a copper contact wire. The wire is 1.5 meters long and was bought at the supermarket for 2$. At the other end of the wire I put on a clamp contact of the crocodile type (bought at the radio market for 1$). In order to keep the round contact on the hand I attached a strap to it. (2$ in the store for sewing).
The most difficult element of the construction is the core. For it we need pure graphite, high-carbon tool steel (carbon content not less than 0.3%) and glass.
1) You can get pure graphite at a blacksmith shop (almost all cities over 100,000 population have them). The forge agreed to sell me a kilogram piece for $15. It is very important to ask if they can cut this piece into smaller pieces right away for a fee. Cutting graphite is a VERY messy business. I used a water cooled electric tile cutter to cut it. I ruined half of the piece while I was getting the hang of the tile cutter. From the other half I got 2 sets of blanks.
2) High carbon steel billet can be ordered at any large medium and small company that deals with metal processing. High carbon steel = tool steel. A set of 2 pieces cost me $8$.
3) Glass can be cut at any glass shop. Glass thickness = 3mm. Cutting cost 1$
The size of the blanks is made to the nearest tenth of a millimeter.
The size of the blanks is made to the nearest tenth of a millimeter.
This is very important, otherwise there will be no contact between them and the machine will not work.
Dimensions:
1) Steel (inches) 0.50.255 = (centimeters) 1.270.6412.7 (two blanks)
2) Graphite (inches) 0.50.255 = (centimeters) 1.270.6412.7 (two blanks)
3) Graphite (inches) 0.51.255 = (centimeters) 1.273.1712.7 (two blanks)
4) 3mm thick glass. (Inches) 0.55 = (centimeters) 1.2712.7 (two blanks)
A threaded hole for a 3mm bolt is made in the top of the steel blank. It will serve as a contact.
This is what the core looks like assembled. The edges are graphite, then steel, and in the center is glass. Everything is securely glued together with 2 layers of paper tape.
Screw the bolts into the holes in the steel bars until they stop. Saw off the heads of the bolts and clean the place of sawing with a file.
Take the previously prepared container. At the bottom we pour a layer of carbon powder of about 2.5 cm. Then insert the core into the container. The distance from the walls of the container to the kernel should be the same on all sides. Using a teaspoon, pour the charcoal powder into the container on the sides of the core. The powder is quite porous, so every 1-2 centimeters tamp it down with a stick. The charcoal powder should cover the kernel by about 2,5 cm. That is, the core should not be visible, only the bolts sticking out of it.
Next, it is necessary to seal the construction hermetically. We take a glue gun (sold in any construction store), and apply a layer of hot glue about 0.5 cm thick on top of the coal. Be sure to check if there are any small holes left out. Next, we knead epoxy glue in a plastic cup. Pour it over the surface of the previous glue layer. The thickness of the epoxy layer should be about 0.7 cm. It should dry for about a day. Now our device is absolutely airtight and shockproof.
One of the bolts is marked red. A red wire will always be connected to it. This is very important for constant polarity.
Application Technique:- immerse the device in a container with ice for 20 minutes (or put it on the balcony for an hour in frosty weather).
- put the contacts on the ankle and the opposite wrist according to the following scheme:
- Day 1 – red on the right wrist, blue on the left ankle; Day 2 – red on the left wrist, blue on the right ankle; Day 3 – red on the left ankle, blue on the right wrist; Day 4 – red on the right ankle, blue on the left wrist;
- Break 1-2 days and repeat the circle again.
- first connect the red wire to the red contact, then the blue to the blue.
- We sit and do our business ) as long as we have patience.
- disconnect first the red contact then the blue
- Rules of use:
- Do not leave under direct sun (moon) rays for more than 20 minutes
- Do not store or use near strong sources of electromagnetic field (must be at least one meter away).
- Do not use the device in a bad mood, because according to Casey the device increases emotions regardless of whether they are pleasant or bad !
3. Wett Cell Battery (Wett Cell Batery).
A battery of liquid cells produced an electric current of very low frequency that could not be felt but could be measured with a meter. It was passed through solutions of gold chloride, silver nitrate, atomidine, or camphor, depending on the needs of the individual and Casey’s prescription. This battery was attached to the body by means of plates, and the placement of these plates could be varied, depending on the needs and complaints of the individual.
The fluid cell battery has been recommended in 609 cases of ailments such as arthritis, multiple sclerosis, paralysis, Parkinson’s disease, nerve deafness and lack of coordination in the nervous system when the body needs to repair tissues and with them lost bodily functions.
The apparatus consists of two containers, a large and a small one. Distilled water, sulfuric acid, zinc, carbon powder and copper sulfate are poured into the large one. This liquid generates a weak electric current. Two rods, copper and nickel, are attached to the lid of a large vessel. The copper one is connected by a wire to the copper contact – the cup that will be attached to the body. The nickel one is connected to the nickel cup, but a small capacitance is also placed between them. A nickel sealed tube is passed through the small vessel. Inside this vessel one of the solutions – gold chloride, silver nitrate, atomidine or camphor – is placed.
Pluses of the device – high power of action and a wide range of diseases that are treated by the device. Minuses – it is very difficult to find the necessary components (pure nickel, gold chloride and silver nitrate), expensive components, the need to recharge solutions once a month, absolute immobility of the system.
Approximate costs for manufacturing the device “Wave Resistance (Radial Appliance)” – 39$, in contrast to bourgeois 350$, quite a tolerable amount. More than half a year of work (some parts were made to order for a very long time).
In a month of using the “Wave Resistance (Radial Appliance)” apparatus, there is no particularly pronounced therapeutic effect. Casey writes that it should take six months to a year of use to have an effect. The general feeling from the application is as follows: As soon as the contacts are connected, a pleasant coolness begins to flow through the body and relief is felt in tense areas of the body. Within ten to fifteen minutes the body is completely relaxed, and within half an hour it starts to fall asleep. After using the device one feels lightness in the body and alertness in the mind. Sleep improves and the number of negative dreams decreases.
There is an opinion that the main effect of the device has on the internal energy – during the action of the device energy glow in different areas of the body gradually becomes more homogeneous. In areas with an excess of luminescence it becomes less, and in areas with a lack of luminescence – more. The luminosity, as it were, spreads over the whole body.